Monday, May 24, 2010
Friday, May 21, 2010
Tool Glossary
Since we're going into Spring, which is traditionally the start of Home Repairs And Spring Cleaning Season, I thought I'd post this handy Tool Glossary.
DRILL PRESS:
A tall upright machine useful for suddenly snatching flat
metal bar stock out of your hands so that it smacks you in the chest
and flings your beer across the room, denting the freshly-painted
project which you had carefully set in the corner where nothing could
get to it.
WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the
workbench with the speed of light. Also removes fingerprints and
hard-earned calluses from fingers in about the time it takes you to
say, "Oh, shit!"
SKILL SAW:
A portable cutting tool used to make studs too short.
PLIERS:
Used to round off bolt heads. Sometimes used in the creation
of blood-blisters.
BELT SANDER:
An electric sanding tool commonly used to convert minor
touch-up jobs into major refinishing jobs.
HACKSAW:
One of a family of cutting tools built on the Ouija board
principle... It transforms human energy into a crooked, unpredictable
motion, and the more you attempt to influence its course, the more
dismal your future becomes.
VISE-GRIPS:
Generally used after pliers to completely round off bolt
heads. If nothing else is available, they can also be used to transfer
intense welding heat to the palm of your hand.
OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in
your shop on fire. Also handy for igniting the grease inside the wheel
hub out of which you want to remove a bearing race..
TABLE SAW:
A large stationary power tool commonly used to launch wood
projectiles for testing wall integrity.
HYDRAULIC FLOOR JACK:
Used for lowering an automobile to the ground after you have
installed your new brake shoes, trapping the jack handle firmly under
the bumper.
BAND SAW:
A large stationary power saw primarily used by most shops to
cut good aluminum sheet into smaller pieces that more easily fit into
the trash can after you cut on the inside of the line instead of the
outside edge.
TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything
you forgot to disconnect.
PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for
opening old-style paper-and-tin oil cans and splashing oil on your
shirt; but can also be used, as the name
Implies, to strip out Phillips screw heads.
STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common
slotted screws into non-removable screws and butchering your palms.
PRY BAR:
A tool used to crumple the metal surrounding that clip or
bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER:
A tool used to make hoses too short.
HAMMER:
Originally employed as a weapon of war, the hammer nowadays is
used as a kind of divining rod to locate the most expensive parts
adjacent the object we are trying to hit.
UTILITY KNIFE:
Used to open and slice through the contents of cardboard
cartons delivered to your front door; works particularly well on
contents such as seats, vinyl records, liquids in plastic bottles,
collector magazines, refund checks, and rubber or plastic parts.
Especially useful for slicing work clothes, but only while in use..
Son of a bitch TOOL:
Any handy tool that you grab and throw across the garage while
yelling " SOB " at the top of your lungs. It is also, most
often, the next tool that you will need.
DRILL PRESS:
A tall upright machine useful for suddenly snatching flat
metal bar stock out of your hands so that it smacks you in the chest
and flings your beer across the room, denting the freshly-painted
project which you had carefully set in the corner where nothing could
get to it.
WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the
workbench with the speed of light. Also removes fingerprints and
hard-earned calluses from fingers in about the time it takes you to
say, "Oh, shit!"
SKILL SAW:
A portable cutting tool used to make studs too short.
PLIERS:
Used to round off bolt heads. Sometimes used in the creation
of blood-blisters.
BELT SANDER:
An electric sanding tool commonly used to convert minor
touch-up jobs into major refinishing jobs.
HACKSAW:
One of a family of cutting tools built on the Ouija board
principle... It transforms human energy into a crooked, unpredictable
motion, and the more you attempt to influence its course, the more
dismal your future becomes.
VISE-GRIPS:
Generally used after pliers to completely round off bolt
heads. If nothing else is available, they can also be used to transfer
intense welding heat to the palm of your hand.
OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in
your shop on fire. Also handy for igniting the grease inside the wheel
hub out of which you want to remove a bearing race..
TABLE SAW:
A large stationary power tool commonly used to launch wood
projectiles for testing wall integrity.
HYDRAULIC FLOOR JACK:
Used for lowering an automobile to the ground after you have
installed your new brake shoes, trapping the jack handle firmly under
the bumper.
BAND SAW:
A large stationary power saw primarily used by most shops to
cut good aluminum sheet into smaller pieces that more easily fit into
the trash can after you cut on the inside of the line instead of the
outside edge.
TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything
you forgot to disconnect.
PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for
opening old-style paper-and-tin oil cans and splashing oil on your
shirt; but can also be used, as the name
Implies, to strip out Phillips screw heads.
STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common
slotted screws into non-removable screws and butchering your palms.
PRY BAR:
A tool used to crumple the metal surrounding that clip or
bracket you needed to remove in order to replace a 50 cent part.
HOSE CUTTER:
A tool used to make hoses too short.
HAMMER:
Originally employed as a weapon of war, the hammer nowadays is
used as a kind of divining rod to locate the most expensive parts
adjacent the object we are trying to hit.
UTILITY KNIFE:
Used to open and slice through the contents of cardboard
cartons delivered to your front door; works particularly well on
contents such as seats, vinyl records, liquids in plastic bottles,
collector magazines, refund checks, and rubber or plastic parts.
Especially useful for slicing work clothes, but only while in use..
Son of a bitch TOOL:
Any handy tool that you grab and throw across the garage while
yelling " SOB " at the top of your lungs. It is also, most
often, the next tool that you will need.
Tuesday, May 18, 2010
For Tom
Saw this pic and I HAD TO post it here for Tom, just in case he didn't see it elsewhere. Hope this brightens your day a bit, buddy - and keep yer head down.
Remember the dumpster Geese?
They're back! Only since the Dumpster is gone, they decided to set their sights even higher - so they perched on top of our building. Sassy little geeses, ain't they?
Monday, May 17, 2010
Calling All Women in the Fort Wayne area
Do you like to dance? Would you be willing to help out a local music group? They're filming footage for their music video, Gypsy Dance, on Saturday May 29, from 7am - 11am at Franke Park. Details are here.
I can say from experience that they're a great group. Their music is unbelievable.
So if you're in the area and want to dance for their video, show up and help out. :)
I can say from experience that they're a great group. Their music is unbelievable.
So if you're in the area and want to dance for their video, show up and help out. :)
Friday, May 14, 2010
Not Invented Here
"Not Invented Here" is a webcomic about programmers, and, incidentally, testers and management. I think it is hilarious. I love Fang, the Tester.
My current favorite is this one: (click on it to see the whole thing)
You can see the archives and the entire strip at http://www.notinventedhere.com
Since it tends to have little "story arcs", I recommend starting at the beginning, of course, but if you don't want to do that, at least start at the comic shown above:
http://notinventedhe.re/on/2010-04-26
You can also get an email subscription of it, or an RSS feed of it, so that it shows up in your inbox daily!
My current favorite is this one: (click on it to see the whole thing)
You can see the archives and the entire strip at http://www.notinventedhere.com
Since it tends to have little "story arcs", I recommend starting at the beginning, of course, but if you don't want to do that, at least start at the comic shown above:
http://notinventedhe.re/on/2010-04-26
You can also get an email subscription of it, or an RSS feed of it, so that it shows up in your inbox daily!
Sunday, May 9, 2010
Happy Mother's Day!
Found this Tom Lehrer video online and it seemed to be disturbingly appropriate for Mother's Day, somehow...
Happy Mother's Day!
Happy Mother's Day!
Wednesday, May 5, 2010
Tuesday, May 4, 2010
Subscribe to:
Posts (Atom)
-
Saw this pic and I HAD TO post it here for Tom, just in case he didn't see it elsewhere. Hope this brightens your day a bit, buddy - an...
-
I believe a lot of things. For example, I believe that people use the English language very imprecisely. I heard someone on the radio this...
-
Well, so to speak. I'm back to work (week 2!) and, due to some things around home that need attending, Kev stayed home this week. So, ...
